|
saturation
Saturation appears a simple concept, the amount of colour.
The easiest way to appreciate what it is, is to use a graphics editor and move
the slider on the saturation control. Move it one way and you have no
saturation and end up with a neutral grey (or black or white in the extreme),
move it the other way and you have full saturation, maximum colourfulness.
It is here, if we want to be a little more precise, that the trouble starts.
How red is red, could we have another pigment which was redder?  For this
we need to delve into colour theory and then the mathematics start, so I'll
just leave it there. <fx: cluck, cluck>
sensor
A device to react to and assess an external stimulus. In
digital photography it is the chip that the light is focussed on to record an
image and replaces the film in film cameras. There are many different
sorts and sizes. If it produces an image that looks the same as a 35mm
camera it is called a full frame sensor. If it is smaller then you
have to apply a factor called a
crop factor to compare
your lenses with those on 35 mm cameras.
shutter speed
This is one of the controlling components of exposure, and is the
amount of time that light is allowed to pass through the lens to the sensing
medium. In the first cameras this was arranged by an iris which opened
and closed, controlled by a spring. By changing the tension on this spring
the time it took for the iris to open and shut again could be varied.
All mechanical, it was a wonder it worked so precisely. The noise of the
spring made a click and the iris made a sort of soft schk noise, so we knew the
picture had been taken. When we got to the SLR (I'm still talking film)
the possibility of the focal plane shutter arose, where there were two
blinds. When the shutter was released the first blind started off across
the film, exposing it. According to the shutter speed setting, the second
blind started a little bit later and stopped the exposure. For a slow
shutter speed the second blind would not start until the first blind arrived,
so that at some point the whole film was being exposed (important for syncing
with flash). For very long exposures (seconds) the second blind would not
start for quite some time. For short exposures a narrow slit would travel
across the film. These focal plane shutters made a much more impressive
scherklunk noise in operation. This was also more impressive if the camera
had a mirror flapping up and down. Nowadays most cameras are electronic
but they still make the same noises, played as a sound effect through a tiny
speaker unless you are using museum mode.
Shutter speeds work on a scale that includes 1 second and is in
multiples of two for long exposures (2 seconds, 4 seconds, etc.) and sub
multiples of two (1/2, 1/4, 1/8th, etc) for short exposures. The reason
for this is that doubling or halving the time, doubles or halves the amount of
light that reaches the recording medium. This is convenient because it is
the same thing that happens with f-stops. So if you increase by 1 f-stop
and decrease by 1 shutter speed step you still have the same exposure.
We will cover this in more detail in the exposure topic.
Now something funny happens, the next faster shutter speed after
1/8th is 1/15th (not 1/16th). The series continues; 1/30th, 1/60th,
1/125th, 1/250th, 1/500th and 1/1000th. What has happened is that these
are approximations to the real values used so that it is easy for us to remember
them. The actual values used are chosen so as to maintain the
doubling/halving of light with each successive value so that the shutter
speed - aperture relationship is maintained.
soft/sharp focus
One of the first problems that the beginner in photography faces is
in getting a sharp, in-focus image. So it can be perplexing to find that
there are techniques used to soften the focus. It is a creative
photography effect, especially useful in glamour photography to minimise skin
blemishes but it can also be used to achieve a dream like quality. It can
be approximated by using a fine mesh (silk stocking) over the lens but it really
requires the use of a special soft focus lens. These can be expensive,
especially if the degree of softness is controllable. There is more on
this in wikipedia.
soft lighting
c.f. hard lighting
Softbox
A means of producing a diffuse soft light. It is an alternative
to using a reflector.
specular highlights
These are bright spots on curved shiny surfaces. The term
specular means mirror and the name comes from
specular
reflection. What they actually are is the image(s) of the light
source in a reflective surface. In the studio, it will be the studio
lighting, outdoors it will probably be the sun. A special case of
specular highlight is catchlight, which is a specular highlight in the
eyes. In the case of a catchlight, it brings life to the eyes and is
desirable, (though bad lighting can cause two catchlights which is not so
good). In other cases, whether they are desirable or not depends upon
the picture. An image of snooker balls on a table could be better if
the specular highlights helped to show the shape, which florescent strip lights
would. Similarly multiple images of the sun in waves can add sparkle.
However if the highlights are distracting they are better cloned out.
wikipedia.
|