|
white balance
Beginners usually do not need to bother with this at first, in Auto
mode the camera looks after it for you (to a degree - more in a minute).
However now that we have picked up Program mode we can now probably set a white
balance ourselves. So what is white balance. It is another of
those topics in colour theory that can be quite complicated, however we only
need the basics.
It is probably best to start with artificial light,
particularly that coming from the old fashioned tungsten bulbs. If you
took a picture with ordinary film under tungsten lighting it came out with a
yellowy/orange tinge to it. To get natural looking colours you had to use
a special film balanced for artificial light. The reason for this is that
light has a quality called colour temperature. Daylight, in full sun is
considered white. (Actually our sun is a yellow star, but we have evolved
to see in daylight, so we perceive it as white). Tungsten light is lacking
in the blue part of the spectrum, so we see it as a warmer orangy colour, light
from cloudy skies is missing red, so it is a colder bluey colour.
(Perversely warm colours are a lower colour temperature and vice versa).
Another problem is that our brains trick us and correct the colours for us so
that unless we have mixed lighting everything looks the normal colours and
we have to work really hard to see the colour casts.
We do not need to worry about white balance in Auto mode since the
camera works out the colour temperature and sets the white balance for us.
This normally works out fine and colours come out right, except for late evening
or early morning, when we are trying to capture those gorgeous skies.
They never look right. What happens is that the camera sees the colour
temperature is low and sets that, so that the picture the camera takes is
adjusted to normal daylight, losing all the lovely warm colours of the
sunset or dawn. To get the camera to take the image as we appreciate it.
we need to tell the camera to use white balance = daylight. The same would
apply in the arctic if we want to capture cold colours as cold colours. If
you are shooting in raw, as you should be, then you can forget about white
balance altogether and leave the camera on auto white balance so that it records
in the Exif data what it thinks the colour temperature was. White balance
is one of the corrections made to the image when saving from the raw data as a
JPEG file. You can set any white balance you wish when processing the RAW
file in ACR. If the white balance is correct, whites will be white and
greys will be grey, if not the whole image will have a colour cast. But
in some cases you may want a colour cast for dramatic effect.
|